i have a edlebrock 440 performer at my intake and on each side (left-right)of the carb on this intake. i have a device mounted. on the left it looks maybe to be something to go to the choke i have a wire going to it but the lever that looks like it may go to the choke its not going to any thing

i have a manual choke FYI

can i remove this one?

on the right side have something that looks like what you see on the distributer

were a hose would attach ..no hose is there
can i remove this one ?

Thanks ...

 

is the area where the hose plugged off? also you might want to check the model of the carb on the website to get technical info on the model that you have.

 

If you can get a picture or two, that would help out (at least for me).

 

I think you refering to the right side... the part in question is not plugged and is not the carb

i will include pictures asap.

I just installed a rebuilt carb i purchased from Holley: 0-3310 750cfm,w/manual choke, and vacuum secondary

dont laff at the engine and wire condition im picking up where someone left off

luckly for me most issues i can resolve with wire dressing and clean up
ill try and get a picture up this evening

 

thanks for the help in advance i took some better pictures
i had to put them on my site the link is below.

i was able to see that edlebrock had intakes with out these two components im thinking they may be for smog

but i wanted to be sure..

http://thyjournal.com/truck%20stage.htm

auerdoan