Mopar electronic ignition conversion kit
#1
New Member
Thread Starter
Mopar electronic ignition conversion kit
So I installed the Mopar electronic ignition conversion kit (P3690428) on my Super Bee this past weekend and curious does anyone know what advance springs come in the distributor? I called Mopar Performance and they were no help, they only offered to sell me the spring tuning kit, which I already have. Just wondering what the baseline springs are I'm starting with.
TIA!
TIA!
#2
Super Moderator
Ain't got a clue. Just figure what springs and cam needed to build in 20 degrees in the distributor and bring it all in at 2500 rpm. Set your intial timing to 15 degrees.
#3
Mopar Lover
beep -
OK, check your initial timing at idle and then total timing around 2500(+) and subtract.
Mine is showing a full curve of 22 deg (32 - 10) without the vacuum advance.
Archer
OK, check your initial timing at idle and then total timing around 2500(+) and subtract.
Mine is showing a full curve of 22 deg (32 - 10) without the vacuum advance.
Archer
Thread
Thread Starter
Forum
Replies
Last Post