Anyone have a picture of this or any side mounted dual carb linkage? Just a guide is all I'm after.

 

Look Down about 7 photos....

http://dyersblowers.com/new_products_2.html

 

found a site with a good pic. note the link to far left is trans linkage. and the link going from the rear carb to the front carb is mounted farther from the throttle shaft than the front carb. this causes the front carb to open faster than the rear. this is cause the rear carb I.E. the main carb. the front carb doesnt open till the rear has opened some 20-30 % . meaning the front carb is not used at low openings. so that both carbs reach wide open at the same timesame.time.http://www.hemmings.com/mus/stories/..._feature7.html

 

found an other pic. on this site its the 2 nd car from the top.. http://blog.hemmings.com/index.php/2014/page/60/