Brake pedal to the floor
10-02-2018, 07:05 AM
#1
Brake pedal to the floor
Just picked up a 72 D100 Saturday morning, had no issues transporting it on to the trailer and off the trailer and driving it up into my driveway. Been moving it around in the driveway and working on a few things. I adjusted the rear drums and haven't done the front yet. But last night I noticed after a few pumps the pedal sinks to the floor and the light comes on. I checked all the wheel cylinders and traced all the brake lines, No leaks and the reservoir was topped off. So is it possible the Master Cylinder died on me after being used so much after the truck sat for 2 years before I bought it. Thanks in Advance guys.
10-02-2018, 08:35 AM
#2
Super Moderator
It's very possible that the master and every wheel cylinder needs to be replaced after sitting.
The following users liked this post:
My72D100 (10-02-2018)
10-02-2018, 12:42 PM
#4
Super Moderator
Good job, fix it once and be done.
Thread
Thread Starter
Forum
Replies
Last Post
BHayes
Chassis, Suspension, and Brakes
3
05-15-2013 03:08 PM
