727 Tranny Prob's

Reply Subscribe

Thread Tools

Search this Thread

Jul 26, 2008 | 12:59 AM

Mixmastermerrill

Guest

Posts: n/a

727 Tranny Prob's

I have a 727 that barely goes into reverse. All the other gears work just fine. Which band adjustment screw is for the reverse? And when I get to that does the screw need to come in or out? Any other suggestions welcome. And the tranny only has about 5,000 miles on it.

Thanks to all

Jul 26, 2008 | 02:22 PM

Doc

Guest

Posts: n/a

Can you pull-the-pan and test-drive it now?

Jul 27, 2008 | 03:42 AM

Mixmastermerrill

Guest

Posts: n/a

No. The tranny is not in the vehicle just yet.

Jul 27, 2008 | 05:04 AM

Doc

Guest

Posts: n/a

So you can not even pull the pan ?

Jul 27, 2008 | 05:04 PM

Mixmastermerrill

Guest

Posts: n/a

Yes,yes I can pull the pan. But what do I do once I do that.

Jul 27, 2008 | 05:41 PM

Doc

Guest

Posts: n/a

First .... what if anything - other than the ATF ... is in the bottom of the pan ?

Jul 29, 2008 | 01:18 AM

Mixmastermerrill

Guest

Posts: n/a

The only thing in the pan, Clean ATF and a Clean Filter. Nothing seems to be missing or loose.
Any other Ideas would be great
Thanks

Jul 29, 2008 | 11:19 AM

richinny

Guest

Posts: n/a

Quote:

Originally Posted by Mixmastermerrill

I have a 727 that barely goes into reverse. All the other gears work just fine.
Thanks to all

can you be more specific? are you talking about the linkage, lever on the transmission case or that when it was in a vehicle, the transmission slipped?