Cam identification, need help

bcuda65 · 04-25-2007, 06:06 PM

Trying to ID the cam in my 360. I pulled it out, and the only thing I cound find were these numbers stamped on the rear of the cam. This is a solid lifter cam.
292XX
296XX
S6
P0756

Mark

bcuda65 · 04-26-2007, 05:38 PM

After talking to the engine builder, he claims it either a Lunati or Ultradyne. Probably a special grind. I also found G stamped along with the other numbers listed. Hoping to find out duration and valve lash.

Mark

04-25-2007, 06:06 PM	#1 (permalink)
bcuda65 Junior Member Join Date: Apr 2007 Posts: 3	Cam identification, need help Trying to ID the cam in my 360. I pulled it out, and the only thing I cound find were these numbers stamped on the rear of the cam. This is a solid lifter cam. 292XX 296XX S6 P0756 Mark

04-26-2007, 05:38 PM	#2 (permalink)
bcuda65 Junior Member Join Date: Apr 2007 Posts: 3	More info After talking to the engine builder, he claims it either a Lunati or Ultradyne. Probably a special grind. I also found G stamped along with the other numbers listed. Hoping to find out duration and valve lash. Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode