New cam shaft, lifters.
#31
Mopar Fan
Thread Starter
#32
Lunati makes some great profiles for your application.
that said,
using Lunati Cams... in my experience anyways... in using them to their FULL potential.... requires a little more continuity regarding KNOWING and making sure adequate "installed" V/Spring Pressure and RATE is applied ? DO NOT GUESS, or THINK it's OK !
Otherwise... your Lunati Cam really won't make any more power than much slower ramp Cams ?
CompCams
The CompCams XE274H is certainly no slouch either in the .488"/.490" Lift Range, with a good idle quality and vacuum for brakes.
Remember,
Torque is that "seat of the pants" feeling, and KING on the street !
see here;
that said,
using Lunati Cams... in my experience anyways... in using them to their FULL potential.... requires a little more continuity regarding KNOWING and making sure adequate "installed" V/Spring Pressure and RATE is applied ? DO NOT GUESS, or THINK it's OK !
Otherwise... your Lunati Cam really won't make any more power than much slower ramp Cams ?
CompCams
The CompCams XE274H is certainly no slouch either in the .488"/.490" Lift Range, with a good idle quality and vacuum for brakes.
Remember,
Torque is that "seat of the pants" feeling, and KING on the street !
see here;
Last edited by Moparbob; 02-19-2014 at 10:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
maca
General Discussion
4
07-17-2014 03:13 PM