I traded for a 62' Chrysler 300 a few years ago with a trans but no engine. Finally got the engine in her and got her running sweet. But uh...the gas pedal goes up through the floor pan and the front pans are rotted out of the car.. so the pedal is laying in the grass beneath the old girl. I did some looking around and all the aftermarket guys sell the pan without the section for the pedal mounts but they offer a FULL passenger floor pan......Does anyone know of a company or individual that makes a FULL front floor pan set for the 61-62 Chryslers? Or have any info on other Mopar products from that era that use the same floor pans I know the Dodge 880 from 63 pretty much the same bodyshell from the doors back...but thoes are even rarer than the 300s... any info would be much appreciated

 

Is it parts of the floor pan or is it part of the firewall?

 

It's part of the floor for sure I had found reference pictures of what it looks like on an old article online where someone is patching the floorboard will see if I can find and post the pic when I get home

Itll be the hole in the top right corner this is from a very old website.

They listed the place they got this patch panel from but i couldnt find anything on the shop online

 

Check the floor pan over at
c2cfabrication.com
see if they have what you need..

 

They were the first place I checked the pans they offer have that part not included

 

This is the floor pan that C2C offers and it seems to be identical to all the other floor pans I'm finding for sale everywhere else. Completely missing the pedal section. I've tried hitting up the fancy 300 Club to see if they have any leads....and the correct patch panel was made by a company called " R Car Fabs" but I haven't found any information on them online. I have considered contacting the guys that did the restoration on the car above and see if they remember the information for that vendor or not