Plans for the weekend?
#1
Admin
Thread Starter
Plans for the weekend?
Heather and I are leaving Thursday evening and heading up north for the weekend. There is a campground that has access to ~75+miles of ATV trails. Her father and I did these trails last year (He rolled the first day there).
Tonight though I've got to get everything loaded and packed so that we can just leave right after work plus I'm doing a lobster dinner for my parent's.
What does everyone else have planned for the weekend?
Tonight though I've got to get everything loaded and packed so that we can just leave right after work plus I'm doing a lobster dinner for my parent's.
What does everyone else have planned for the weekend?
#2
Mopar Lover
Join Date: Apr 2009
Location: Michigan: The First Line of Defense From The Canadians!
Posts: 1,892
Likes: 0
Received 4 Likes
on
4 Posts
Troubleshoot and repair Hobart 140 Arc Welder/Generator so I can flip it on Craigslist. Replace oilpan in 99 Cirrus [Really! How can a thing filled with oil rust-out?!]. Check front end on my 95 Ram, its shaking like a dog shitting razor blades. Get drunk, pet dog, bang wife. Hopefully in that order.
#3
Mopar Fanatic
Join Date: Apr 2010
Location: Northern Lower Michigan
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a great weekend on the ATV !
How far north you headed Michigan has a ton for State kept ATV trails.
My in laws are on the other side of the earth in the Philippines, long way to ride
We will be spending a great portion of this weekend cleaning and painting the new rear end for the Dakota. I just can't see putting it up in there all rusty and nasty. Preliminary observations and measurements are pointing toward an good fit!
Oh, don't forget your spark plug wrench LOL
Joe.
How far north you headed Michigan has a ton for State kept ATV trails.
My in laws are on the other side of the earth in the Philippines, long way to ride
We will be spending a great portion of this weekend cleaning and painting the new rear end for the Dakota. I just can't see putting it up in there all rusty and nasty. Preliminary observations and measurements are pointing toward an good fit!
Oh, don't forget your spark plug wrench LOL
Joe.
#6
Mopar Lover
Hey Tim .... Enjoy the trails... Sounds like a lot of fun for sure... I'm in the garage this weekend still trying to get the new hotrod done.... Hope to get brakelines on this weekend... Hopefully on the ground next....
#7
Mopar Lover
The wife and I bought a pop-up in May and we have been so buysy that this will be the first time we will get to use it. leaving Friday after work and coming home Sunday.
don't worry we are not want to go to the atv trails [hard enough to get her in the mopar]
don't worry we are not want to go to the atv trails [hard enough to get her in the mopar]
#8
Mopar Lover
I know there are not many Ford fans on this site. But Ive been working on rebuilding the 302 in my F150 after it crack a head. This weekend my brother is coming home from school and he is going to help me set it back in with a front end loader, he is all most as good as me at working it.
But we got to make this
Fit into the Hole in this
So we get nothing but this
Somebody get some coffee going!
But we got to make this
Fit into the Hole in this
So we get nothing but this
Somebody get some coffee going!
#9
Mopar Lover
gotta clean up the yard. finish putting the Polara in the garage ( garage was never ment to have a car in it LOL ) change the trans and real oil in the truck, and put it on truck trader. then go to work, sleep, and more.
#11
A.K.A Bob Dodge
Join Date: Mar 2010
Location: couer d' alene id.
Posts: 1,526
Likes: 0
Received 0 Likes
on
0 Posts
#14
Mopar Lover
Troubleshoot and repair Hobart 140 Arc Welder/Generator so I can flip it on Craigslist. Replace oilpan in 99 Cirrus [Really! How can a thing filled with oil rust-out?!]. Check front end on my 95 Ram, its shaking like a dog shitting razor blades. Get drunk, pet dog, bang wife. Hopefully in that order.
Thread
Thread Starter
Forum
Replies
Last Post
freightdog319
Neon / SRT-4
0
10-07-2011 01:15 PM