New Member
#1
New Member
Hi all
working on a 65 Belvedere II, trying to make Mopar In the Park! But have ran into the problem rewiring. Got everything BUT dash. My problem I'm looking for help with the pins in circuit boards. Which pin is for electric to dash lights, and other gauges. I got the ammeter done.
Any help would be welcomed.
Thanks jimmie
Start of the project. My first.
working on a 65 Belvedere II, trying to make Mopar In the Park! But have ran into the problem rewiring. Got everything BUT dash. My problem I'm looking for help with the pins in circuit boards. Which pin is for electric to dash lights, and other gauges. I got the ammeter done.
Any help would be welcomed.
Thanks jimmie
Start of the project. My first.
#2
Mopar Lover
Best to pull the cluster and back trace it. Look at what pin goes to what lamp. Them Test light the harness for what goes were....
But. If you ever find a good source for those cluster diagrams... Please share it with us !!!!!!!
Cool project... And welcome to the site....
Take a picture of the front and back of the cluster and the harness if you would like some help going threw it...
But. If you ever find a good source for those cluster diagrams... Please share it with us !!!!!!!
Cool project... And welcome to the site....
Take a picture of the front and back of the cluster and the harness if you would like some help going threw it...
#4
Super Moderator
Welcome to the forum.
Thread
Thread Starter
Forum
Replies
Last Post
Mideavel1
MoparForums Help and Suggestion Center
1
12-16-2017 10:16 AM