89 Dodge Dakota Shelby 318 Fuel sending unit
#1
New Member
Thread Starter
89 Dodge Dakota Shelby 318 Fuel sending unit
I am looking for a Sending unit for this truck. No one seems to carry it Dealer ships or parts stores. They only made around 15-1600 of these. Does anyone happen to know a part number or something it would be greatly appreciated.
if you need a pic of what it looks like i can set one up.
It has 3 Nipples that stand straight up. and a 5 pin Circle plug in.
if you need a pic of what it looks like i can set one up.
It has 3 Nipples that stand straight up. and a 5 pin Circle plug in.
#4
My brother in-law had a 91 (might have been a 93) Dakota with a 318. Perhaps the sending unit is the same? His wasn't a Shelby or anything so the parts should be standard replacement stuff.
#7
Mopar Fanatic
#8
New Member
Thread Starter
Lol....
Now i got a new issue, I fixxed the sending unit but now, when i turn the key
It primes it self and i get a little bit of fuel but when i Crank it No fuel what so ever comes out of the supply outlet......Anyone have ANY idea what could be the problem....The Actual pump is New
It primes it self and i get a little bit of fuel but when i Crank it No fuel what so ever comes out of the supply outlet......Anyone have ANY idea what could be the problem....The Actual pump is New
#10
New Member
Thread Starter
I didn't
I didn't Replace it i made a easy mod. And the return line Nibble (off the top of the sending use thats broke off in the pic i showed) I was able to get a little larger line on to that broken nipple and then ran the line to the Metal like just Got rid of the 45 Degree angle. And the orig problem was the pump was bad.
#12
New Member
Thread Starter
Yeh
Yeh i have i get it, Then I get Voltage At the pump when it primes then when i go to crank it the volts drop to 0.2 what ya think the Eng control?
#14
New Member
Thread Starter
All right Here we go again. Lol, The hall Effect pick up inside the Distrib, is that going to be my Elec control Mod? This dosn't seem to have one, Because with a new coil I aint getting any spark to the Dist.....
Thread
Thread Starter
Forum
Replies
Last Post
twalace
General Technical Questions
0
08-08-2010 10:23 AM