1973 Dodge pickup 4X4 with 360 and standard transmission

Old Dec 21, 2021 | 02:54 PM
  #1  
William Allison's Avatar
Thread Starter
New Member
 
Joined: Dec 2021
Posts: 1
Likes: 1
From: Roosevelt Arizona
1973 Dodge pickup 4X4 with 360 and standard transmission

I am struggling trying to understand the forum way of communication. I have a 1973 Dodge pickup long bed 4X4 with 360 and standard transmission. I am looking for an electrical schematic and possibly a service manual if anyone is willing to share. I have some wiring that is disconnected in the engine compartment and other places. This truck I just picked up hasn't ran in 30 years. Engine turned over by hand without any issues at all. Alternator is missing but just picket one up and going to install. Nothing was tagged or marked so im trying to find out what wires go where. Also the coil is just laying on the intake manifold, it is connected but no mount or anything. there is a condenser laying on the manifold as well. Not hooked up, I thought the condensers were only used if your ignition system used points. I have the electronic ignition system. Any assistance would be outstanding. Thanks in advance.
Reply
Old Dec 22, 2021 | 10:20 AM
  #2  
gwgdog66's Avatar
New Member
 
Joined: May 2016
Posts: 18
Likes: 1
From: OKC, OK
Hello,

Welcome by the way. Have you tried this site yet? it has a bunch of different wiring schematics. It may not have your exact year.
https://mymopar.com/wiring-and-electrical/

Last edited by gwgdog66; Dec 22, 2021 at 10:26 AM.
Reply
Old Dec 24, 2021 | 06:06 PM
  #3  
Scott93307's Avatar
Mopar Fan
 
Joined: Jul 2021
Posts: 35
Likes: 2
From: Bakersfield
Originally Posted by William Allison
I am struggling trying to understand the forum way of communication. I have a 1973 Dodge pickup long bed 4X4 with 360 and standard transmission. I am looking for an electrical schematic and possibly a service manual if anyone is willing to share. I have some wiring that is disconnected in the engine compartment and other places. This truck I just picked up hasn't ran in 30 years. Engine turned over by hand without any issues at all. Alternator is missing but just picket one up and going to install. Nothing was tagged or marked so im trying to find out what wires go where. Also the coil is just laying on the intake manifold, it is connected but no mount or anything. there is a condenser laying on the manifold as well. Not hooked up, I thought the condensers were only used if your ignition system used points. I have the electronic ignition system. Any assistance would be outstanding. Thanks in advance.
I bought a color coded wiring diagram for my 72 from classic car wiring.com for 19 dollars I think
Reply
Old Dec 27, 2021 | 01:19 PM
  #4  
RacerHog's Avatar
Mopar Lover
 
Joined: Jun 2013
Posts: 11,070
Likes: 952
From: Monrovia SO-CAL (USA)
You can also check with these folks also >>>>>> https://classiccarwiring.com/?fbclid...4uXPv0y7Afa_Wg

Good Luck... Keep us posted on your progress !!!!
Reply
Old Dec 27, 2021 | 01:21 PM
  #5  
RacerHog's Avatar
Mopar Lover
 
Joined: Jun 2013
Posts: 11,070
Likes: 952
From: Monrovia SO-CAL (USA)
Also... Post up some pictures... We mite be able to help if we see what your struggling with...
Reply
Old Dec 27, 2021 | 02:30 PM
  #6  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,466
Likes: 548
You can find your post in quick lincs under todays posts.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jd_boggs
72-93 Dodge Trucks
7
Jun 27, 2021 08:09 AM
shaverusmc
94-Current Dodge Trucks
2
Apr 3, 2019 12:43 PM
ClemM882
Engines, Exhaust and Fuel systems
1
Nov 8, 2012 04:35 AM
mi72duster
Mopar Classifieds
0
Jul 13, 2011 08:59 AM
cclark99
72-93 Dodge Trucks
1
Nov 5, 2007 03:12 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:55 PM.