Hi guys i am in the process of replacing my two front wheel cylinders, My issue is one of the bolt heads is obstructed and cannot not be accessed by a wrench or a socket, To try and get better access i loosened the four nuts holding the backing plate, no movement, i placed a jack near the wheel to take weight off of the shocks just in case it was binding the bolts, what am i missing? something is holding the plate tightly in position, also any other ideas on how to remove the obstructed wheel cylinder bolt. pete

 

Did you get it? If not post a pict of the stubborn nut, not my wife , so we can see what you see.
a

 

Yes i figured it out, i could not get the backplate off, in the end the bolts were seized on and needed some penetrating's oil and vibration.

 

Nice.... Mopar on !!! Cheers