I added electric fans, fuel pump, new stereo, and some interior lights to my 69 coronet. I am looking for an alternator that can support all that, I was hoping that someone could tell me where I can get a 100-120 amp alternator that will work with the factory brackets.

 

I'm using a Delco CS130 on my 360 Motor in my pick up

 

Coronet, if you are going to put a Great Big alternator on one of these old cars, PLEASE read this:

http://www.madelectrical.com/electri...p-gauges.shtml

 

Thanks RacerHog, I have a 440, but will look into the delco might be something that will work for me. I wasn't aware that a gm alternator would fit in a mopar

 

Great article roadrunner, thank you. I never even thought of that, you have just saved me allot of headaches!!!

 

Yes, these were not really adequate "back when." If you dig into some of the shop manuals, there was an option for the larger alternators that has become slang as "taxi / fleet" wiring. What they did was to run the ammeter and battery/ alternator wires in/ out of the bulkhead with separate, larger wires through separate grommets in the firewall.

"Way back" in the 70's I damaged the bulkhead connector of my old 70 RR and drilled out the connector and fed larger wires through the connector. This of course was way before Al Gore invented the internet, LOL