Good Morning

Old Jan 21, 2017 | 07:22 PM
  #631  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Originally Posted by Coronet 500
Demon is getting a 727, Shawn lost his interest in the clutch and shifting.

Mustang needs very little work but he came over this morning and said no because if he has any time he wants to work on my '70 Coronet, "I'd like to see it finished, your not getting any younger Dad" he says.

First Grandchild for me.

Today we got my car up on the 2ft high rolling stand so I can finish the few bits of welding and Shawn can clean and paint the underside before he runs brake/fuel lines and such.

Then I have to finish the tubs and install the quarter panels, not looking forward to being a body man.
You go allot going on there Dan...
Grandkids are a blast.. I have lots of fun with all 9 of mine..
Sounds like making some good headway on the 70 Coronet.. Nice !!!
Old Jan 21, 2017 | 07:33 PM
  #632  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
I do have to say.. it was a great day to be out for a cruise here in SO-CAL
About 60 was the high..
Attached Thumbnails Good Morning-img_20170121_133613851.jpg  
Old Jan 21, 2017 | 08:13 PM
  #633  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Originally Posted by RacerHog
Man... You are working your butt off...

Don't worry I've got plenty.
Old Jan 22, 2017 | 06:01 AM
  #634  
xaza's Avatar
Mopar Fanatic
 
Joined: Jul 2011
Posts: 265
Likes: 39
From: Colorado
good morning all. I have been studying a lot over the past couple weeks and on Friday passed the test for my Master Journeyman mechanical. Now I just have to wait until some warmer weather to install the parts for the Jeep. If all goes well should be able to run it one more time at Bandimere this summer.
Old Jan 22, 2017 | 07:18 AM
  #635  
Coronet 500's Avatar
Mopar Lover
 
Joined: May 2011
Posts: 2,732
Likes: 361
From: Ontario Canada
Big Congratulations.

Not familiar with all of the American trade licensing can I assume this is HVAC based?
Old Jan 22, 2017 | 07:47 AM
  #636  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Congratulations and yes let's hear more about it.
Old Jan 22, 2017 | 08:44 AM
  #637  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Good job....Congrats!!!!!!
Old Jan 22, 2017 | 11:42 AM
  #638  
xaza's Avatar
Mopar Fanatic
 
Joined: Jul 2011
Posts: 265
Likes: 39
From: Colorado
Originally Posted by Coronet 500
Big Congratulations.

Not familiar with all of the American trade licensing can I assume this is HVAC based?
Yes it is. I got laid off in November from a company I was with for over 3 years. I had not been continuing my education and career because I was working for a good company that was paying me well. Decided I wanted to better myself before I moved on to another company and decided this was my next step. This puts me in position to open my own company which I can run weekends/evenings and have something to fall back on if I ever get blindsided by a company again. I am still in the process of educating myself on all those details. Things were delayed due to some family issues but in the end the delay was very beneficial to me.
Old Jan 22, 2017 | 12:10 PM
  #639  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Originally Posted by xaza
Yes it is. I got laid off in November from a company I was with for over 3 years. I had not been continuing my education and career because I was working for a good company that was paying me well. Decided I wanted to better myself before I moved on to another company and decided this was my next step. This puts me in position to open my own company which I can run weekends/evenings and have something to fall back on if I ever get blindsided by a company again. I am still in the process of educating myself on all those details. Things were delayed due to some family issues but in the end the delay was very beneficial to me.
You will never regret your decision to get back to school, good for you!
Old Jan 25, 2017 | 09:42 AM
  #640  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Well it's a snow day in northern Iowa today, kids are out of school and playing in 12" of wet snow. Fun day for the kids!
Hope all's good with every one.
Old Jan 27, 2017 | 07:51 AM
  #641  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Good Morning Y'all... Hope your in for a good weekend? Going to be cool and sunny here in SO-CAL... 65* will be the high.. I am Waiting for the roof to dry out some so that I can play Roofer on a Simi-Flat Roof.. Not My kind of fun.

Well... Have a great weekend Y'all....
Old Jan 27, 2017 | 10:09 AM
  #642  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Bob a bag of quick set concrete mix is your friend, that stuff around the leak will fix it for years. Works likes stop leak in a radiator.
Old Jan 27, 2017 | 12:53 PM
  #643  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Originally Posted by Iowan
Bob a bag of quick set concrete mix is your friend, that stuff around the leak will fix it for years. Works likes stop leak in a radiator.
Weight is not an issue???????? Never would have guessed that was a fix ???
Old Jan 27, 2017 | 12:55 PM
  #644  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
The one thing I hate more than a leak>>>>>> Is fixing one.....
Old Jan 27, 2017 | 01:54 PM
  #645  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
I had a flat roof on my shop, I hate flat roofs! One big pain in the butt.
Old Jan 28, 2017 | 05:18 AM
  #646  
Coronet 500's Avatar
Mopar Lover
 
Joined: May 2011
Posts: 2,732
Likes: 361
From: Ontario Canada
Morning. Getting my tired bones ready for another day of carpentry work. Yesterday prepared for the beam in Mustang son's basement, removed the wall and it goes up today.

Hopefully all his young strong buddies show up at noon to hoist. Me, don't tell anyone but I am dragging my *** today.
Old Jan 28, 2017 | 09:34 AM
  #647  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
With 12" of new snow this week we are off to the sledding hill with a couple of new sleds, we gave them a cote of wax just because so they should be fast.!

My back hurts just thinking about the rest of the day.
Old Jan 28, 2017 | 03:14 PM
  #648  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Good Afternoon Y'all.... I'm with you guy... The older I get the more broken I feel...Nice day to do the roof... 70* and a slight breeze... All I can say, Is, I hurt all over now...Bahahahahahahahahaha...

Ok.... I'm done being a sissy.... Rant Over...
Old Jan 28, 2017 | 04:02 PM
  #649  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
That kid will sweat at twenty degrees, I froze my *** off.
Old Jan 28, 2017 | 04:10 PM
  #650  
Coronet 500's Avatar
Mopar Lover
 
Joined: May 2011
Posts: 2,732
Likes: 361
From: Ontario Canada
450lb, 14' 6" beam up with the engine hoist, slick as sh.... Nice to see my son's buddies all showed up like they said. Feel good now but will likely wake up sore, job well done and a few good laughs.
Old Jan 28, 2017 | 05:41 PM
  #651  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Last one I put up in my garage I did my self, 20 foot H beam through the end of the shop, picked it up with the cheery picker one end at a time and slid it in.
Old Jan 29, 2017 | 05:04 AM
  #652  
Coronet 500's Avatar
Mopar Lover
 
Joined: May 2011
Posts: 2,732
Likes: 361
From: Ontario Canada
Morning. Can't sleep in anymore like my son, always up at 6;30 even when the alarm isn't set. Hopefully I can recoup today.

Our beam was a tough one like threading a needle, picked up in the middle and slid into place, not my idea of fun. When his wife came home we made like we were planning on knocking out the foundation for a ramp to the underground garage and the beam was for a chain hoist trolley. Not funny to her, at all.
Old Jan 29, 2017 | 11:38 AM
  #653  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Good Morning Y'all... Boy sounds like we are all having a great time working on our off hours of work,,Bahahahahahahahaha....
Got the roofing out of the way.... Just food for thought.... A 300+LBS old guy should not be up on the roof, doing any kind of roofing... Just saying....lol
Dam I hurt all over.... Time for a Burger and some Fries....

Good Morning-bobs-stuff-2013-5-smartphone-115.jpg
Old Jan 29, 2017 | 12:21 PM
  #654  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Originally Posted by RacerHog
Good Morning Y'all... Boy sounds like we are all having a great time working on our off hours of work,,Bahahahahahahahaha....
Got the roofing out of the way.... Just food for thought.... A 300+LBS old guy should not be up on the roof, doing any kind of roofing... Just saying....lol
Dam I hurt all over.... Time for a Burger and some Fries....

Attachment 10977
Are you saying there's no mistaking you falling off the roof?

Glad you have it fixed Bob, drip drip drip, did you hear something?
Old Jan 29, 2017 | 12:36 PM
  #655  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
If I fix a leak in the roof it will drip on a sunny day!
Old Jan 29, 2017 | 08:16 PM
  #656  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Originally Posted by Iowan
Are you saying there's no mistaking you falling off the roof?

Glad you have it fixed Bob, drip drip drip, did you hear something?
Yes...Bahahahahahahaha
Dont jinks me....lol
Old Jan 29, 2017 | 08:16 PM
  #657  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Originally Posted by Iowan
If I fix a leak in the roof it will drip on a sunny day!
I see we draw the same lucky straws...
Old Jan 29, 2017 | 08:18 PM
  #658  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
And to think I missed the "Grand National Roadster Show" to fix a leaky roof..
F-*%$*&*&#@@#%$^%*&...

Just hit the "Slideshow"...
http://public.fotki.com/bowtie0069/c...rand-national/
Old Jan 29, 2017 | 08:24 PM
  #659  
RacerHog's Avatar
Thread Starter
Mopar Lover
 
Joined: Jun 2013
Posts: 11,036
Likes: 948
From: Monrovia SO-CAL (USA)
Big Bubba.... Welcome to the site....
Old Jan 29, 2017 | 08:27 PM
  #660  
Iowan's Avatar
Super Moderator
 
Joined: Mar 2015
Posts: 5,438
Likes: 545
Originally Posted by RacerHog
And to think I missed the "Grand National Roadster Show" to fix a leaky roof..
F-*%$*&*&#@@#%$^%*&...

Just hit the "Slideshow"...
http://public.fotki.com/bowtie0069/c...rand-national/
Bob we know you just went to Wal-Mart and got a big blue tarp for the redneck roof repair.

Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:15 PM.