Good Morning Mopar Friends !!!!!
#184
Mopar Lover
Thread Starter
Oh boy, we got a good one coming in on the Hook....
2002 Honda Civic,, coming in with a “ It cranks but will not start” 200.000 + miles, and they want me to look at it... Oh well. Here goes nothing !!!!🤐🤐🤐🍻🍻
2002 Honda Civic,, coming in with a “ It cranks but will not start” 200.000 + miles, and they want me to look at it... Oh well. Here goes nothing !!!!🤐🤐🤐🍻🍻
#187
Mopar Lover
Thread Starter
Good Morning Y'all !!!!! Happy Sunday Fun day.... Hot here in SO-CAL 100* here... Just out Driving the old Dodge.... If gas was cheaper I would cruise it a lot more. But at the tune of 4.54 per Gallon.... Well you know got to save it for going to work....
Have a great day Yall...
Have a great day Yall...
#188
Super Moderator
Its about $2.50 per here in iowa Bob, you ever feel like your getting ripped off?
#191
Mopar Lover
Thread Starter
Good Morning Y'all.... Hope you are all having a great Friday... Looks like a nice weekend for us here in SO-CAL... 80* here today... Got to go clean off the pine needles off the roof before the cooler time of season gets here... So I guess you can say that i'm Up oh the roof....lol.... Have a great day.... What are you doing today ??????
Have a good day Y'all...
Have a good day Y'all...
#192
Super Moderator
High school football game, the boy wanted to go and hang with friends so here we are. At least we're up by five.....
The following users liked this post:
RacerHog (09-21-2019)
#194
Mopar Lover
Thread Starter
Good Morning Y'all.... Going up to mid 90's again for the next few days. Didnt get the roof stuff cleared, So Going to try to tackle it today... Y'all have a great day now.... L8ER
#197
Howdy
'What you doing to your Mopar today?'
Nothing.Currently Mopar less at the moment.
My 440 substitute is a Lincoln 430 engine w/C6 automatic.Pullout from a '58-64 Lincoln Continental.
Back to Mopar's.
Looking to save a Mopar drivetrain from the junkyard.
If you run across any please let me know.
Have a nice day
Bob
'What you doing to your Mopar today?'
Nothing.Currently Mopar less at the moment.
My 440 substitute is a Lincoln 430 engine w/C6 automatic.Pullout from a '58-64 Lincoln Continental.
Back to Mopar's.
Looking to save a Mopar drivetrain from the junkyard.
If you run across any please let me know.
Have a nice day
Bob
The following users liked this post:
RacerHog (10-01-2019)
#198
Mopar Lover
Thread Starter
Howdy
'What you doing to your Mopar today?'
Nothing.Currently Mopar less at the moment.
My 440 substitute is a Lincoln 430 engine w/C6 automatic.Pullout from a '58-64 Lincoln Continental.
Back to Mopar's.
Looking to save a Mopar drivetrain from the junkyard.
If you run across any please let me know.
Have a nice day
Bob
'What you doing to your Mopar today?'
Nothing.Currently Mopar less at the moment.
My 440 substitute is a Lincoln 430 engine w/C6 automatic.Pullout from a '58-64 Lincoln Continental.
Back to Mopar's.
Looking to save a Mopar drivetrain from the junkyard.
If you run across any please let me know.
Have a nice day
Bob
#199
Mopar Lover
Mr Mopar, where are you if I come across one?
Not much here, took down a tree in the backyard Sunday. Made up a hinge mechanism and some reinforcing tubing for the the Viper fiber glass tilt front end.
Not much here, took down a tree in the backyard Sunday. Made up a hinge mechanism and some reinforcing tubing for the the Viper fiber glass tilt front end.
#202
Super Moderator
Dan how are you coming with your Viper project, I'm assuming that it can be called that now.🙂
#203
Mopar Lover
Viper project is just fine, Shawn can't stop saying Viper, I call it the race car.
Doing stuff like in post #199. I have to complete the tubing reinforcement this weekend so the fiber glass over layer can be put on, I think at that point it's complete mounting of the front. Haven't been going at the car like I was, don't have the energy like I did. Shawn has been very busy and working many weekends for his customers. This body stuff just sucks, I'm a metal working, chassis, suspension kinda guy. We'll get there, everyone Shawn tells what we're doing thinks it's great and wish they could do something with their Father or their Son, I guess I sometimes take that for granted and only focus on the task. You know the goal oriented management dick everyone has at work, guess I got to lighten up.
Doing stuff like in post #199. I have to complete the tubing reinforcement this weekend so the fiber glass over layer can be put on, I think at that point it's complete mounting of the front. Haven't been going at the car like I was, don't have the energy like I did. Shawn has been very busy and working many weekends for his customers. This body stuff just sucks, I'm a metal working, chassis, suspension kinda guy. We'll get there, everyone Shawn tells what we're doing thinks it's great and wish they could do something with their Father or their Son, I guess I sometimes take that for granted and only focus on the task. You know the goal oriented management dick everyone has at work, guess I got to lighten up.
The following users liked this post:
RacerHog (10-04-2019)
#204
Super Moderator
Maybe sometime after the first pass or twenty all the hours and money spent won't matter or seam so much.
The following users liked this post:
RacerHog (10-04-2019)
#206
Good morning
Have to paint an engine base/oil pan on a Kohler K241 10HP engine.
It's been hot tanked and bead blasted.Have to paint it before it show surface rust.
Have two cans of Walmart Colorplace grey primer.
Going to see if they are still good today.
Have to paint an engine base/oil pan on a Kohler K241 10HP engine.
It's been hot tanked and bead blasted.Have to paint it before it show surface rust.
Have two cans of Walmart Colorplace grey primer.
Going to see if they are still good today.
The following users liked this post:
RacerHog (10-04-2019)
#210
Super Moderator
Hello mr. Bob hows things out west?