electrical problem HELP!!

Reply Subscribe

Thread Tools

Search this Thread

May 26, 2008 | 01:55 PM

bpatterson

Guest

Posts: n/a

electrical problem HELP!!

I have a 67 cornet the tail lights are the problem, I have turn signal lights but no brake or tail lights. There is power to the tail. Any help would be great!!!

Thanks

May 29, 2008 | 01:54 AM

gilesie

Guest

Posts: n/a

check the earth/ground

Feb 4, 2009 | 11:46 AM

coronet 440

Guest

Posts: n/a

no brake lights

help! just replaced master cylinder. cant tell you if they worked before that or not but no brake lights now. pretty sure grounds are good. could be head light switch but i dont want to go there yet. help asap thanks.

Feb 4, 2009 | 11:54 AM

Polaradude

Mopar Lover

Joined: Dec 2008

Posts: 2,509

Likes: 0

From: East Coast Canada

Quote:

Originally Posted by bpatterson

I have a 67 cornet the tail lights are the problem, I have turn signal lights but no brake or tail lights. There is power to the tail. Any help would be great!!!

Thanks

Silly question time... Fuses ok ? Brake light switch ok ? Check connector on firewall for good connections ? Bulbs not burnt ?
Run a jumper from the battery positive side to brake lights and work backwards from there.

Feb 4, 2009 | 07:40 PM

64fury

Mopar Fanatic

Joined: Feb 2008

Posts: 290

Likes: 0

From: Edmonton, AB

Quote:

Originally Posted by coronet 440

pretty sure grounds are good.

Don't be pretty sure... be damn sure. for the five minutes it takes redo the ground connections it's well worth it. Also check the bulbs, fuses and connections, could be a break in the wiring somewhere. If it were the brake switch you'd have tail lights, and if it were the Headlight switch you'd have brake lights. The turn lights should be seperate to the tail and brake. Do you have a wiring diagram?

Best of luck!